LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Rear Suspension & Wheel Alignment) >> On-Vehicle Service >> Stabilizer Link Ball Joint Dust Cover Inspection

Stabilizer Link Ball Joint Dust Cover Inspection

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using your fingers, press the dust cover to check for a crack or damage.
  2. If the dust cover has a crack or damage, replace the stabilizer link.
    NOTE: If the dust cover has a crack or damage, the ball joint could be damaged.
scientia non olet · About LEMON Manuals