Rear Wheel Alignment Check And Adjustment: Toe-In
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Standard value:
At the center of tire tread: 3 ± 2 mm (0.12 ± 0.08 inch)
Toe-angle (per wheel): 0 ° 02' - 0 ° 12'
If it is out of the standard range, adjust as follows:
Turn the toe adjusting bolt (the mounting bolt inside the body on the control link) to adjust.
Left wheels: Clockwise (+) Toe in
Right wheels: Clockwise (-) Toe in
Toe-in varies approximately 3.2 mm (0.13 inch) for each scale mark. (equivalent to 0°16' of the toe angle for one side)