LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Rear Suspension & Wheel Alignment) >> On-Vehicle Service >> Rear Wheel Alignment Check And Adjustment >> Camber

Rear Wheel Alignment Check And Adjustment: Camber

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Standard value: -0°30' ± 0°45' (Difference between right and left wheels must be 0°30' or less) 

NOTE:
  • The camber is pre-adjusted at factory and is not adjustable.
  • As for vehicles with aluminum wheel, use a compensator to measure the camber and caster.
Fig 1: Measuring Camber And Caster
G09665937Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals