Lower Arm Bushing Replacement

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: As the bushing has different outer diameters at both ends, be careful not to confuse the removal direction with the press-fit direction.

Use the following special tools to remove and press-fit the lower arm bushing:

Arm bushing remover and installer (MB992123)
Bushing remover and installer base (MB991448)

Fig 1: Removing Arm Bushing
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Bushing remover and installer supporter (MB991449)

Fig 2: Installing Arm Bushing
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.