LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Front Suspension & Wheel Alignment) >> Strut Assembly >> Removal And Installation >> Installation Service Point >> >> A << Stabilizer Link And Strut Connection Nut Installation

>> A << Stabilizer Link And Strut Connection Nut Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Use a hexagon wrench to install the stabilizer link and strut connection nut as shown in the figure.

Fig 1: Installing Stabilizer Link And Strut Connection Nut Using Hexagon Wrench
G09665897Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals