LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Front Suspension & Wheel Alignment) >> Strut Assembly >> Disassembly And Reassembly >> Reassembly Service Points >> >> A << Coil Spring Installation

>> A << Coil Spring Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure that the coil spring is seated properly in the concave groove of the spring pad.
  1. Align the bottom end of the coil spring with the end of the recess in the spring lower pad.
    Fig 1: Spring Lower Pad And Coil Spring Installation Dimension
    G09665903Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Align the top end of the coil spring with the end of the lug in the spring upper pad.
    Fig 2: Identifying End Of Lug In Spring Upper Pad Alignment Dimension
    G09665904Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.