Kingpin Inclination

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Standard value: 12°45' ± 1°30'

CAUTION: Do not apply the vehicle weight to the wheel bearing while loosening the driveshaft nut.

NOTE:

The camber is pre-adjusted at factory and is not adjustable.
As for vehicles with aluminum wheel, use a compensator to measure the camber and caster.

Fig 1: Measuring Camber And Caster

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.