LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Front Suspension & Wheel Alignment) >> On-Vehicle Service >> Ball Joint Dust Cover Check >> Stabilizer Link Ball Joint Dust Cover Check

Stabilizer Link Ball Joint Dust Cover Check

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the dust cover for cracks or damage by pushing it with your finger.
  2. If the dust cover is cracked or damaged, replace the stabilizer link (Refer to STABILIZER BAR  ).
    NOTE: If the dust cover has a crack or damage, the ball joint could be damage.
scientia non olet · About LEMON Manuals