Lower Arm Bushing Replacement

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Replace the back side bushing according to the following procedure.

Fig 1: Identifying Lower Arm Bushing

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Use the following special tools to remove the bushing:
- Arm bushing remover and installer (MB992119)
- Ring (MB990979)
- Rear suspension bushing base (MB990890)
  
  Fig 2: Identifying Special Tools To Remove Arm Bushing
  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Use the following special tools to locate the front suspension lower arm bushing protrusion as shown in the figure. Press-fit the special tool until it reaches the lower arm assembly.
- Arm bushing installer (MD998375)
- Spacer base (MB992868)
- Suspension bushing base (MB990643)
  
  Fig 3: Pressing Front Suspension Lower Arm Bushing Protrusion
  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.