Service Specifications
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Standard value | Limit | |
|---|---|---|---|
| Rear axle total backlash mm (in) | - | 5 (0.2) | |
| Wheel bearing axial looseness mm (in) | - | 0.05 (0.002) | |
| Hub rotation starting torque N.m (in-lb) | - | 1.4 (12.4) | |
| Electronic control coupling stud bolt length mm (in) | 21.6 - 24.4 (0.86 - 0.96) | - | |
| Final drive gear backlash mm (in) | 0.08 - 0.15 (0.004 - 0.005) | - | |
| Drive gear runout on backside mm (in) | - | 0.05 (0.002) | |
| Differential gear backlash mm (in) | 0 - 0.076 (0 - 0.029) | 0.2 (0.01) | |
| Drive pinion rotation torque N.m (in-ib) | When replaced with new one (coated with rust inhibitor oil) | 0.7 - 1.2 (7 - 10) | - |
| ETJ boot assembly dimension mm (ft-ib) | 75 ± 3 (3.0 ± 0.1) | - | |