INSPECTION PROCEDURE 6: Noise while Turning < DIFFERENTIAL >: Diagnosis

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the side bearing for wear or damage.
Q: Is the side bearing worn or damaged?
- YES: Replace the part. Then go to Step 3.
- NO: Go to step 2.
STEP 2. Check the side gear, pinion gear or pinion shaft for damage.
Q: Is the side gear, pinion gear or pinion shaft damaged?
- YES: Replace the part. Then go to Step 3.
- NO: Go to Step 3.
STEP 3. Retest the system.
Q: Is the abnormal noise eliminated?
- YES: The procedure is complete.
- NO: Start over at Step 1.