INSPECTION PROCEDURE 5: Bearing Noise while Driving or Coasting < DIFFERENTIAL >: Diagnosis
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the drive pinion rear bearing for cracks or damage.
Q: Is the drive pinion rear bearing cracked or damaged?
- YES: Replace the part. Then go to Step 2.
- NO: Go to Step 2.
- STEP 2. Retest the system.
Q: Is the abnormal noise eliminated?
- YES: The procedure is complete.
- NO: Start over at Step 1.