LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Rear Axle - AWD) >> Driveshaft Assembly >> Disassembly And Reassembly >> Reassembly Service Points >> >> B << ETJ Boot Band (Small)/ETJ Boot Band (Large) Tightening

>> B << ETJ Boot Band (Small)/ETJ Boot Band (Large) Tightening

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Adjust the distance between the boot bands to the standard value to adjust the air volume inside the ETJ boot to the specified value, then be sure to tighten the ETJ boot band (large) and ETJ boot band (small).

Standard value (A): 75 ± 3 mm (3.0 ± 0.1 inch) 

Fig 1: Identifying Distance Between Boot Bands To Standard Value
G09665770Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.