>> A << Spider Assembly/ETJ Case Installation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Special grease is used for the joint. Do not mix the new and previous types of grease or different types of grease.
Fill the ETJ case with the specified grease, insert the drive shaft, and then fill the specified grease again.
Specified grease: Repair kit grease
Application amount: 75 ± 10 g (2.6 ± 0.4 oz)
NOTE:
When using the repair kit grease, fill the half of the grease into the joint and the other half into the boot as a guideline, and consume the grease completely.