LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Rear Axle - AWD) >> Driveshaft Assembly >> Disassembly And Reassembly >> Disassembly Service Points >> << A >> ETJ Case/Spider Assembly Removal

<< A >> ETJ Case/Spider Assembly Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not disassemble the spider assembly.
  1. Wipe off the grease inside the ETJ case and on the spider assembly.
  2. If the grease is contaminated with the foreign material (water, dust, etc.), be sure to wash the spider assembly.