LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Rear Axle - AWD) >> Differential Carrier Assembly >> Disassembly >> Final Drive Gear Teeth Contact Adjustment >> << C >> Drive Gear Removal

<< C >> Drive Gear Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Put mating marks on the drive gear and differential case as a reference for the reassembly operation.
  2. Loosen the drive gear tightening bolts in a diagonal order to remove the drive gear.
    Fig 1: Loosening Drive Gear Tightening Bolts
    G09665787Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals