<< A >> Front Bracket Assembly Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not insert the screwdriver blades too deep. Doing so could damage the stator coil.

Insert the blades of screwdrivers between the front bracket assembly and stator core, and pry and separate them with the screwdrivers.

Fig 1: Inserting Screwdriver Blades Between Front Bracket Assembly And Stator Core

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.