LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Electronically Controlled AWD - With Diagnostics) >> Troubleshooting >> Symptom Procedures >> Inspection Procedure 1: Scan tool (M.U.T.-III) cannot Communicate with the Electronically Controller AWD System >> Comments On Trouble Symptom

Comments On Trouble Symptom

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

If scan tool (M.U.T.-III) cannot communicate with the electronically controlled AWD system, the CAN bus lines may have a problem. If the electronically controller AWD system is not in operation (in case of no AWD operation), the AWD-ECU power supply circuit system or AWD-ECU may have a problem.

scientia non olet · About LEMON Manuals