LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Heating, Air Conditioning & Ventilation - With Diagnostics) >> On-Vehicle Service >> Idle-Up Inspection

Idle-Up Inspection

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before inspection, set the vehicle to the pre-inspection condition.
  2. Check that the idling speed is within the standard value range.

    Standard value: 

    650 ± 100 r/min < 4J1 > 

    600 ± 100 r/min < 6B3 > 

    NOTE: The idling speed is controlled by the ISC system automatically, so does not require adjustment.
  3. Operate the air conditioning by turning on the A/C switch. Then check that the idling speed is within the standard value range.

    Standard value: 

    750 ± 100 r/min < 4J1 > 

    760 r/min < 6B3 > 

scientia non olet · About LEMON Manuals