LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Heating, Air Conditioning & Ventilation - With Diagnostics) >> Compressor Assembly >> Disassembly And Assembly >> Reassembly Service Points >> >> F << Air Gap Adjustment

>> F << Air Gap Adjustment

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tightening Self-Locing Nut Using Special Tool
G09667521Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Check whether or not the air gap of the clutch is within the standard value.

Standard value: 

0.15 - 0.40 mm (0.006 - 0.016 inch) 

NOTE: If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.
Fig 2: Checking Air Gap Of Clutch
G09667522Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals