Trouble Symptom Chart

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Trouble symptom	Inspection procedure No.	Reference
COMMUNICATION WITH THE SCAN TOOL (M.U.T.-III) IS NOT POSSIBLE	1	INSPECTION PROCEDURE 1: Communication with the scan tool (M.U.T.-III) is not possible
COOL AIR DOES NOT COME	2	INSPECTION PROCEDURE 2: Cool air does not come
THE BLOWER DOES NOT WORK	3	INSPECTION PROCEDURE 3: The blower does not work
THE BLOWER AIR VOLUME CANNOT BE CHANGED	4	INSPECTION PROCEDURE 4: The blower air volume cannot be changed
THE INSIDE/OUTSIDE AIR CHANGEOVER IS IMPOSSIBLE	5	INSPECTION PROCEDURE 5: The Inside/Outside Air Changeover is impossible
THE A/C COMPRESSOR DOES NOT WORK	6	INSPECTION PROCEDURE 6: The A/C compressor does not work
A/C OUTLET AIR TEMPERATURE CANNOT BE SET	7	INSPECTION PROCEDURE 7: A/C outlet air temperature cannot be set
AIR OUTLETS CHANGEOVER IS IMPOSSIBLE	8	INSPECTION PROCEDURE 8: Air outlets changeover is impossible
A/C PRESSURE SENSOR SYSTEM	9	INSPECTION PROCEDURE 9: A/C pressure sensor system
BLOWER MOTOR POWER SUPPLY SYSTEM	10	INSPECTION PROCEDURE 10: Blower motor power supply system
A/C-ECU POWER SUPPLY SYSTEM	11	INSPECTION PROCEDURE 11: Heater controller assembly (A/C-ECU) power supply system