LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Heating, Air Conditioning & Ventilation - With Diagnostics) >> Automatic A/C Diagnosis >> Diagnostic Function >> Check Of Freeze Frame Data >> Display item list

Display item list

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Item No. Item name Data item Unit
1 Odometer Total driving distance after the DTC is generated km
2 Ignition cycle Number of times the ignition switch is turned "ON" or "LOCK (OFF)" after the past failure transition. Number of counts is displayed.
3 Elapsed time Total elapsed time after a DTC is generated min(1)
4 Accumulated minute Cumulative time for current malfunction of DTC min
(1) Total elapsed time can be stored up to 65534 minutes. The display of scan tool (M.U.T.-III) is fixed to 65534 minutes after 65534 minutes have elapsed. Or, if the battery is disconnected, the total elapsed time cannot be measured properly. Thus, 65535 minutes (null value) is displayed. Since the value is calculated according to the information from the ETACS-ECU, a proper value may not be displayed when the ETACS-ECU time-out has occurred.
scientia non olet · About LEMON Manuals