LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Heating, Air Conditioning & Ventilation - With Diagnostics) >> Automatic A/C Diagnosis >> Customization Function

Customization Function

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Using the ETACS system of scan tool (M.U.T.-III), the following functions can be programmed. The programmed information is held even when the battery is disconnected.

Adjustment item (scan tool display) Adjustment item Adjusting content (scan tool display) Adjusting content
A/C Recirculation Control With/without inside/outside air automatic control function Disable No function
Enable With function (Initial condition)
A/C Switch Control With/without A/C automatic control function Disable No function
Enable With function (Initial condition)
Eco Mode(1) Function to activate ECO mode air-conditioner Eco Activates the ECO mode.
Comfort Deactivates the ECO mode.
A/C Sensible temp. customize Adjusting mean value for temperature setting -2 Decreases the control temperature two degrees than the temperature displayed on the LCD.
-1 Decreases the control temperature one degree than the temperature displayed on the LCD.
0 No change (Initial condition)
1 Increases the control temperature one degree than the temperature displayed on the LCD.
2 Increases the control temperature two degrees than the temperature displayed on the LCD.
FOOT/DEF Air outlet ratio Changes air distribution rate for DEF/FOOT vents during manual operation. Normal D/F2 (Initial condition)
FOOT > DEF D/F1 (more to FOOT vent): More air flows through FOOT vents.
FOOT < DEF D/F3 (more to DEF vent): More air flows through DEF vents.
FACE/FOOT Air outlet ratio Changes air distribution rate for FACE/FOOT vents during manual operation. Normal B/L2 (Initial condition)
FACE > FOOT B/L1 (more to FACE vent): More air flows through FACE vents.
FACE < FOOT B/L3 (more to FOOT vent): More air flows through FOOT vents.
Auto Rear Defogger (Engine Start) Activates the rear window defogger when the ambient temperature is low. (The rear window defogger has never been activated since the ignition switch was turned on last time) Disable No function (Initial condition)
Enable With function
NOTE:
(1) Vehicles with ECO switch only