>> A << Steering Wheel Assembly/Driver's Air Bag Module Installation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When installing the steering wheel assembly and air bag module, do not trap the clock spring harness.
- After centering the clock spring (Refer to DRIVER'S AIR BAG MODULE AND CLOCK SPRING REMOVAL AND INSTALLATION )
- After checking that the clock spring center alignment is already performed, install the steering wheel assembly so that its boss part is aligned with the rib of the clock spring slowly.
- Install the driver's airbag module.
- After the installation, check that there is no abnormality when the steering wheel is fully turned to left and right.