LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Electric Power Steering (EPS) - With Diagnostics) >> Steering Column Shaft Assembly >> Disassembly And Reassembly < Vehicles Without Steering Lock > >> Reassembly Service Point >> >> A << Body/Bracket Installation

>> A << Body/Bracket Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the housing from the column shaft end, and then engage the protrusion on the housing with the recess on the steering column shaft assembly.
  2. Tighten the flange bolt to the specified torque.

    Tightening torque: 12 ± 5 N.m (106 ± 44 in-lb) 

    Fig 1: Identifying Steering Column Shaft Assembly Bracket And Flange Body
    G09666075
scientia non olet · About LEMON Manuals