LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Electric Power Steering (EPS) - With Diagnostics) >> Power Steering Gear Box And Linkage >> Disassembly And Reassembly >> Reassembly Service Points >> >> B << Band Installation

>> B << Band Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Hold the rack housing, and use special tool bellows band crimping tool (MB992209 or MB992908) to crimp the bellows band securely.
  • Crimp the bellows band until special tool (MB992209 or MB992908) touches the stopper.
  1. Use special tool (MB992209 or MB992908) to crimp the bellows band.
    Fig 1: Crimping Bellows Band Using Special Tool (1 Of 2)
    G09666081
    Fig 2: Crimping Bellows Band Using Special Tool (2 Of 2)
    G09666082
  2. Check that crimped width (A) is within the standard value.

    Standard value (A): 2.4 - 2.8 mm (0.10 - 0.11 inch) 

    Fig 3: Identifying Crimped Width Dimension
    G09666083
scientia non olet · About LEMON Manuals