<< B >> Knee Air Bag Module Removal
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- The air bag module must not be measured with such equipment as an ohmmeter.
- The air bag module must not be disassembled.
- The removed air bag module should be stored in a clean, dry place with the deployment surface facing up.
After removing the knee air bag module, use the flat-tipped screwdriver, and pull out the lock button of the harness-side connector in the arrow direction to release lock.