LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Supplemental Restraint System (SRS) -- Lancer Evolution) >> Knee Air Bag Module >> Removal And Installation >> Installation Service Points >> >> B << Knee Air Bag Module Installation

>> B << Knee Air Bag Module Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Take care not to bend or distort the knee air bag when installing it.
  • Take care that the surrounding components do not trap the air bag.
  • Take care that the front pillar trim clips or other parts do not interfere with the strap.

Connect the knee air bag module connector, then securely lock the locking button of the harness-side connector.

scientia non olet · About LEMON Manuals