>> A << Brake Tube Connection
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After connecting the brake pipe, check that the brake pipe is secured into the vehicle body side fixing clips.
Install the brake pipe to the hydraulic unit as shown in the figure.
- From master cylinder (primary) < Marking color: Blue >
- From master cylinder (secondary) < Marking color: Yellow >
- To front brake (RH)
< Marking color: Orange >
- To front brake (LH)
< Marking color: Red >
- To rear brake (LH) < Marking color: Pink >
- To rear brake (RH) < Marking color: White >