LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Active Stability Control System (ASC) - With Diagnostics) >> FCM On/Off Switch >> Inspection >> FCM On/Off Switch Continuity Check

FCM On/Off Switch Continuity Check

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. As shown in the figure, connect the circuit tester to the FCM ON/OFF switch as a single unit.
  2. Check the continuity status when the FCM ON/OFF switch is pressed and when the switch is released.
    Fig 1: Checking FCM ON/OFF Switch Continuity
    G09666026
    Item When the FCM ON/OFF switch is released (Not being operated) When the FCM ON/OFF switch is pressed
    Continuity between terminal No. 5 and No. 8 No continuity Continuity exists (2 Ω or less)
    Continuity between terminal No. 5 and No. 8 Continuity exists Continuity exists
scientia non olet · About LEMON Manuals