LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Active Stability Control System (ASC) - With Diagnostics) >> Diagnosis >> Diagnostic Function >> Fail-Safe Functions < ASC-Ecu > >> Illumination condition of warning light and display in case of failure

Illumination condition of warning light and display in case of failure

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
DTC No. Item Brake warning light, brake warning display ABS warning light, ABS warning display ASC warning light ASC warning display ASC OFF light
C100A FL wheel speed sensor circuit OFF(1) ON ON ON
C1015 FR wheel speed sensor circuit
C1020 RL wheel speed sensor circuit
C102B RR wheel speed sensor circuit
C1011 FL wheel speed sensor signal OFF(1) ON (2) ON(2) ON(2)
C101C FR wheel speed sensor signal
C1027 RL wheel speed sensor signal
C1032 RR wheel speed sensor signal
C1014 FL wheel speed sensor performance OFF(1) ON (2) ON(2) ON(2)
C101F FR wheel speed sensor performance
C102A RL wheel speed sensor performance
C1035 RR wheel speed sensor performance
C1041 FL wheel speed tone performance OFF(1) ON (2) ON(2) ON(2)
C1042 FR wheel speed tone performance
C1043 RL wheel speed tone performance
C1044 RR wheel speed tone performance
C1046 FL wheel speed sensor phase OFF(1) ON (2) ON(2) ON(2)
C1047 FR wheel speed sensor phase
C1048 RL wheel speed sensor phase
C1049 RR wheel speed sensor phase
C104B FL inlet valve ON ON ON ON
C104F FR inlet valve
C1053 RL inlet valve
C1057 RR inlet valve
C105F FL outlet valve ON ON ON ON
C1063 FR outlet valve
C1067 RL outlet valve
C105B RR outlet valve
C1200 FL-RR cut valve ON ON ON ON
C1204 FR-RL cut valve
C1208 FL-RR suction valve
C120C FR-RL suction valve
C2104 Valve power supply circuit ON ON ON ON
C1073 Motor drive circuit OFF ON (2) ON(2) ON(2)
C2116 Pump motor voltage low OFF ON (2) ON(2) ON(2)
C121D Brake fluid pressure sensor circuit Only the hydraulic brake assist system is defective. OFF OFF ON OFF
Other than above OFF ON ON ON
C121E Brake fluid pressure sensor OFF ON ON ON
C1000 Brake Switch (stuck) OFF OFF ON ON
C123B System control too long OFF OFF ON(8) ON(8)
C2200 ECU internal error ON(5) ON(6) ON ON
C2101 Power supply high voltage 18.0 ± 1.0 V or more ON ON ON ON
C1395 Incomplete Brake fluid filling OFF ABS warning light: Flashing (2 Hz) ABS warning display: ON OFF OFF
C121C Torque request signal rejection OFF OFF ON ON
C2206 Re-execution of variant coding OFF ON ON ON
C1210 Longitudinal G sensor input circuit Abnormality in longitudinal G-sensor output voltage OFF OFF(3), ON(4) ON OFF(3), ON(4)
C1242 Longitudinal G sensor signal Abnormality in longitudinal G-sensor output signal OFF OFF(3), ON(2)(4) ON(2) OFF(3), ON(2)(4)
C123C Sensor cluster malfunction Abnormality in lateral G & yaw rate output value OFF OFF ON(8) ON(8)
C1392 Incomplete learn (Longitudinal G) ON ON ON ON
C1393 Incomplete learn neutral (Lateral G) ON ON ON ON
C2204 Sensor cluster internal error OFF OFF(3) ON(4), (6) ON(8) ON(8)
C1219 Steering angle sensor signal OFF OFF ON(8) ON(8)
C121A Steering angle sensor initialization Steering wheel sensor neutral point not learned ON ON ON ON
C2205 Steering angle sensor internal error OFF OFF ON ON
C2002 Valve calibration not completed OFF ON ON ON
C1608 EEPROM fail OFF OFF OFF OFF
C1707 Implausible coding data OFF ON(7) ON ON(7)
C1800(9) ACC Acceleration/Deceleration monitor OFF OFF ON OFF
C1801(9) ACC/FCM Auto Stop light monitor OFF OFF ON OFF
C1802(9) ACC/FCM ECU fail OFF OFF ON OFF
C1803(9) ACC mode off disagreement OFF OFF ON OFF
C1804(9) ACC deactivation disagreement OFF OFF ON OFF
U0100 Engine CAN timeout OFF OFF ON ON
U0101 T/M CAN timeout OFF OFF ON ON
U0114(4) AWD CAN timeout OFF OFF ON ON
U0126 Steering angle sensor CAN timeout OFF OFF ON ON
U0141 ETACS CAN timeout OFF OFF ON (7) ON
U0401 Engine (CAN message) OFF OFF ON ON
U0428 Steering angle sensor (CAN message) OFF OFF ON ON
U0440(9) AWC (CAN message) OFF OFF OFF OFF
U0435(9) Implausible AWC data OFF OFF OFF OFF
U1011(9) ACC/FCM CAN signal error OFF OFF ON OFF
U1013(9) Driver demand torque signal OFF OFF ON OFF
U1073 Bus-off OFF OFF ON ON
U1195 Coding not completed OFF ON ON ON
U1197 Coding data unavailable OFF ON ON ON
U15A0(9) ACC/FCM ECU CAN timeout OFF OFF ON OFF
(1) Turns on when two or more wheels are faulty.
(2) Stays on until the vehicle speed reaches 10 km/h (6.2 mph) when the ignition switch is turned to ON next time.
(3) FWD.
(4) AWD.
(5) Does not illuminate when there is no effect to the EBD function.
(6) Does not illuminate when there is no effect to the ABS function.
(7) May not illuminate in some trouble causes.
(8) Stays on until the vehicle speed 20 km/h (12.4 mph) or higher and turn left or right when the ignition switch is turned to on next time.
(9) Vehicles with ACC/FCM.

*10 : Vehicles with S-AWWC.
scientia non olet · About LEMON Manuals