LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Ignition System) >> On-Vehicle Service >> Spark Plug Check And Cleaning >> Spark Plug Cleaning

Spark Plug Cleaning

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Sufficiently apply the brake cleaner to the plug end.
    NOTE: Repeatedly applying the brake cleaner is acceptable during the cleaning.
  2. Using special tool MB992273, intensively clean the electrode for 1 to 2 minutes.
    NOTE: Even if using strong force, the electrode is not damaged.
    NOTE: In case of insufficient cleaning, it is permissible to take longer than 2 minutes for cleaning.
  3. After the cleaning, sufficiently remove and then dry both of the carbon and the brake cleaner on the plug, using a waste cloth or air blowing.
    Fig 1: Identifying Spark Plug And Special Tool
    G09664787Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals