>> C << Fuel Main Pipe Connection
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Pull up the retainer of fuel main pipe to unlock before installing.
CAUTION:
- When pushing in the retainer of the fuel main pipe connector, pay attention to avoid damage to the retainer.
- After the installation of the fuel high-pressure hose, slightly pull the fuel high-pressure hose to check that it is connected securely. At this time, also check that there is approximately 1 mm (0.04 inch) play.
- Install the fuel main pipe to the fuel pump module securely and push in the retainer of the fuel main pipe connector to lock the fuel main pipe and fuel pump module.