Check Chart For Trouble Symptoms
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Trouble symptom | Inspection procedure No. | Reference | |
|---|---|---|---|
| SCAN TOOL (M.U.T.-III) CANNOT COMMUNICATE WITH THE ACC SYSTEM IS IMPOSSIBLE. | Scan tool (M.U.T.-III) cannot communicate with all systems. | - | Refer to CAN BUS DIAGNOSTICS TABLE . |
| Scan tool (M.U.T.-III) cannot communicate only with ACC/FCM-ECU. | 1 | Inspection Procedure 1: Scan tool (M.U.T.-III) cannot communicate with ACC system is impossible | |
| CRUISE CONTROL CANNOT BE SET (NO RESPONSE SET - SWITCH IS PRESSED). | 2 | Inspection Procedure 2: Cruise Control cannot be Set (No Response SET - Switch is Pressed) |
|
| THE CRUISE CONTROL IS CANCELLED ALTHOUGH THE SWITCH IS NOT OPERATED DURING THE ACC OPERATION. | 3 | Inspection Procedure 3: The Cruise Control is Cancelled Although The Switch is not Operated During The ACC Operation |
|
| WHEN THE ACC DISTANCE SWITCH IS OPERATED, THE DISTANCE FROM VEHICLE TRAVELLING IN FRONT CANNOT BE CHANGED. | 4 | Inspection Procedure 4: When The ACC Distance Switch is Operated, The Distance from Vehicle Travelling in Front cannot be Changed |
|