LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Automatic Transaxle On-Vehicle Service - With Diagnostics) >> Transaxle Control >> Inspection >> Key Lock Relay Check < Vehicles Without Kos >

Key Lock Relay Check < Vehicles Without Kos >

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Shift the selector lever to P position.
  2. Use a jumper wire to connect terminal No. 5 of the selector lever assembly connector to the battery (+) terminal, terminal No. 6 to the battery (-) terminal. Then apply battery voltage.
  3. Check for continuity between the selector lever assembly connector terminals No. 4 and No. 5.
    Jumper wire Continuity between terminals No. 4 and No. 5
    Connected Yes (2Ω or less)
    Disconnected No
scientia non olet · About LEMON Manuals