LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Automatic Transaxle On-Vehicle Service - With Diagnostics) >> Automatic Transaxle Diagnosis < A/T > >> How To Initialize A/T Learned Value >> Initialization Procedure

Initialization Procedure

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the selector lever to the P range and turn the ignition switch to the LOCK (OFF) position. Then, connect scan tool (M.U.T.-III) to the data link connector.
  2. Turn the ignition switch to the ON position, and then move the selector lever to the R range.
  3. Depress the accelerator pedal while depressing the brake pedal. (Engine is not running.) Using the scan tool (M.U.T.-III), execute the clear DTC function for the TCM (even if no codes are stored).
NOTE: Performing initialization of the learned value will also erase the DTC.
scientia non olet · About LEMON Manuals