DTC P1705: Throttle Position Sensor Information (Engine): Diagnosis
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check for CAN communication system malfunction.
Q: Are the DTC U0001, U0100, U0141, P1705, P1706 stored?
- YES: Check and repair the CAN communication system.
- NO: Go to Step 2.
- STEP 2. Check the throttle position sensor and ECM side main unit and connector wiring.
Q: Is the check result normal?
- YES: Go to Step 3.
- NO: Repair or replace the failure section.
- STEP 3. Erase the DTC, and drive the vehicle for a while.
Check that the normal code is displayed.
Q: Is the check result normal?
- YES: The procedure is complete.
- NO: Replace the TCM.