LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Overhaul - 2.4L) >> Water Hose And Pipe >> Removal And Installation >> Installation Service Points >> >> A << Thermostat Housing/Water Pipe Assembly Installation

>> A << Thermostat Housing/Water Pipe Assembly Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the thermostat housing and water pipe, and temporarily tighten them to the cylinder head and water pump. Then tighten them to the specified torque of 24 ± 3 N.m (18 ± 1 ft-lb).

scientia non olet · About LEMON Manuals