Special Tools
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Tool | Tool number and name | Supersession | Application |
|---|---|---|---|
| MB991883 Flywheel stopper | General service tool | Securing of drive plate or flywheel | |
| MB991398 Spark plug wrench | General service tool | Removal and installation of spark plug | |
| MB992106 O-ring installer | - | Installation of O-ring on injector injection nozzle side | |
| MB991953 Oxygen sensor wrench | MB991953-01 | Removal and installation of heated oxygen sensor | |
| MB991396 Oil filter wrench | General service tool or MB991396-01 | Removal and installation of oil filter | |
| MD998727 Oil pan FIPG cutter | MD998727-01 | Removal of oil pan lower | |
| MB991448 Bushing remover and installer base | MB991448-01 | Press fit of front oil seal | |
| Oil seal installer | - | Press fit of oil seal to installation part of valve lift control motor | |
| MB992075 Handle | - | ||
| MB992854 Magnet base plate | - | Adjustment of inlet valve clearance | |
| MD998913 Dial gauge extension | - | ||
| MB991146 Installer | - | Installation of dowel pin of camshaft | |
| MD998735 Valve spring compressor | MD998735-01 | Compression of valve spring | |
| MB992089 Retainer holder C | - | ||
| MB992085 Valve stem seal pliers | - | Removal of valve stem seal | |
| MB992922 Valve stem seal installer adjustable | - | Installation of valve stem seal | |
| MB991346 Top cover wrench | - | Removal and installation of oil pump sprocket | |
| MD998718 Crankshaft rear oil seal installer | MD998718-01 | Press fit of rear oil seal | |
| MB991614 Angle gauge | General service tool |
|
|
| MD998780 Piston pin setting tool | MIT216941 | Extraction and press fit of piston pin | |
| MB991659 Guide D | - |