Sealants And Adhesives: Notes
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specified sealant and adhesive | Remark |
|---|---|---|
| Engine oil pressure switch | ThreeBond 1141J, ThreeBond 1215, ThreeBond 1212D or equivalent | Semi-drying sealant |
| Crank angle sensor | ThreeBond 1207D or equivalent | |
| Engine coolant temperature sensor | ThreeBond 1324N, LOCTITE 262 or equivalent | Anaerobic adhesive |
| Timing chain case | ThreeBond 1217G (MITSUBISHI MOTORS GENUINE Part No.1000A923) or equivalent | Semi-drying sealant |
| Timing chain case cover | ||
| Oil pan | ThreeBond 1227D, ThreeBond 1217G (MITSUBISHI MOTORS GENUINE Part No.1000A923), ThreeBond 1207F (MITSUBISHI MOTORS GENUINE Part No.1000A992), LOCTITE 5970, LOCTITE 5900 or equivalent | |
| Rocker cover (matching area of the cylinder head and the timing chain case assembly) | ThreeBond 1227D, ThreeBond 1217G (MITSUBISHI MOTORS GENUINE Part No.1000A923), LOCTITE 5900 or equivalent | |
| Rocker arm and camshaft assembly (matching area of the rocker arm camshaft assembly rear side arch part and cylinder head) | ThreeBond 1227D or equivalent | |
| Cylinder head gasket (matching area of the cylinder block and the cylinder head) | ThreeBond 1217G (MITSUBISHI MOTORS GENUINE Part No.1000A923), LOCTITE 5900 or equivalent | |
| Ladder frame | ThreeBond 1227D, LOCTITE 5900 or equivalent | |
| Drive plate bolt | ThreeBond 1324 or equivalent | Anaerobic adhesive |