LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Overhaul - 2.4L) >> Oil Pan And Timing Chain Case >> Removal And Installation >> Installation Service Points >> >> C << Front Oil Seal Installation

>> C << Front Oil Seal Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a small amount of engine oil to the entire inner diameter of the front oil seal lip.
  2. Use special tool Bush remover and installer base (MB991448) to press in the front oil seal into the recess of the timing chain.
    Fig 1: Pressing Front Oil Seal Into Timing Chain Recess Using Special Tool (MB991448)
    G09663492Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals