LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Overhaul - 2.4L) >> Crankshaft And Cylinder Block >> Removal And Installation >> Installation Service Points >> >> B << Thrust Bearing Installation

>> B << Thrust Bearing Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the thrust bearing on the No. 3 bearing on the cylinder block side. Application of engine oil makes the installation easy.
  2. Install the thrust bearing so that the grooved side is on the crankshaft weight side.
    Fig 1: Identifying Thrust Bearing Groove
    G09663604Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals