LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Overhaul - 2.4L) >> Balancer Chain >> Removal And Installation >> Removal Service Points >> << A >> Drive Plate Bolt Removal

<< A >> Drive Plate Bolt Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use special tool MB991883 to secure the drive plate.
  2. Remove the drive plate bolts.
    Fig 1: Identifying Special Tool Flywheel Stopper (MB991883)
    G09663556Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.