LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Engine Cooling System) >> Thermostat >> Removal And Installation < 2. 4 L Engine > >> Installation Service Points >> >> A << Thermostat Installation

>> A << Thermostat Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Avoid adhesion of grease to the rubber ring of the thermostat. If the rubber ring is damaged, replace the thermostat.

Install the thermostat with care to avoid peeling or damage to the rubber ring. When installing the thermostat, face the jiggle valve of the thermostat upward.

Fig 1: Identifying Thermostat Jiggle Valve And Rubber Ring
G09664622