Brake Pad Wear Inspection
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When replacing, replace both brake pad assembly (right and left) as a set.
- If there is a significant difference in thickness between the brake pads at right and left, check the sliding area of the brake caliper.
Measure the brake pad thickness at the most worn area. If the brake pad thickness is less than the limit value, replace the brake pad.
Standard value: 10.0 mm (0.39 inch)
Limit: 2.0 mm (0.08 inch)