LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Mechanical - 3.0L) >> Oil Pan And Oil Strainer >> Removal And Installation >> Removal Service Points >> << C >> Engine Upper Oil Pan Removal

<< C >> Engine Upper Oil Pan Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine upper oil pan mounting bolts.
    CAUTION: Do not use special tool MD998727. The engine upper oil pan is made of aluminum and this tool will damage it.
  2. Screw in the bolt (M10 x 1.5) into bolt hole A in the location shown. Then lift the upper oil pan and remove it.
    Fig 1: Locating Bolt Hole
    G09663693Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals