LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Mechanical - 3.0L) >> Cylinder Head Gasket >> Removal And Installation >> Removal Service Points >> << B >> Cylinder Head Assembly Removal

<< B >> Cylinder Head Assembly Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the bolts in two or three steps in the order of the numbers shown in the illustration, and remove them.

Fig 1: Cylinder Head Bolt Loosening Sequence
G09663709Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.