LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Mechanical - 3.0L) >> Cylinder Head Gasket >> Removal And Installation >> Installation Service Points >> >> B << Camshaft Sprocket Installation

>> B << Camshaft Sprocket Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use special tools MB990767 and MD998719 in the same way as during removal to hold the camshaft sprocket.
  2. Tighten the camshaft sprocket mounting bolt to the specified torque.

    Tightening torque: 90 ± 10 N.m (66 ± 7 ft-lb) 

    Fig 1: Installing Camshaft Sprocket Using Special Tools MB990767 And MD998719
    G09663714Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals