Service Specifications
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Standard value | Limit | |
|---|---|---|---|
| Drive belt tension | Vibration frequency Hz (Reference) | 123 - 156 | - |
| Tension N (lb) (Reference) | 268 - 421 (60.3 - 94.6) | - | |
| Basic ignition timing at idle | 5° BTDC ± 3° | - | |
| Actual ignition timing at curb idle | Approximately 5° BTDC | - | |
| CO contents % | 0.5 or less | - | |
| HC contents ppm | 100 or less | - | |
| Curb idle speed r/min | 650 ± 100 | - | |
| Compression pressure (200 r/min) kPa (psi) | 1,180 (171) | Minimum 800 (116) | |
| Compression pressure difference of all cylinder kPa (psi) | - | Minimum 100 (15) | |
| Intake manifold vacuum at curb idle kPa (in Hg) | - | Minimum 60 (18) | |