>> C << Timing Chain Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Align the timing chain mark made during removal with the mark for removal and installation of the rocker arm and camshaft assembly on the V. V. T. sprocket.
CAUTION: Be careful not to drop the timing chain tensioner mounting bolts into the timing chain case.

Fig 1: Identifying Rocker Shaft Holder And V.V.T. Sprocket Mark
Assemble the timing chain tensioner, and tighten the mounting bolts to the specified torque.
Tightening torque: 11 ± 3 N.m (97 ± 26 in-lb)
Remove the hard wire or L-shaped hexagon wrench fixing the plunger of the timing chain tensioner to apply tension to the timing chain.

Fig 2: Fixing Plunger Of Timing Chain Tensioner Using Hard Wire